Announcements • Re: v7.15rc [testing] is released!
Holy changelog Batman !Statistics: Posted by nz_monkey — Fri Apr 19, 2024 12:39 pm
View ArticleWireless Networking • Re: hAP ax²: clients connection stability issue
Hi !What kind of settings do you have ? Are you using Fast Transition (some devices still cannot live/survive this) and WPA3 (same...) ?For testing purposes try to config your device without FT and...
View ArticleForwarding Protocols • Re: eBGP v6.x to v7.x migration
Code: #### Put your prefix here that you want to announce/ip/firewall/address-list/add list=MYSUBNET address=122.23.0.0/24 ### this is just a sample#### i assume that you have point to point...
View ArticleGeneral • Re: Allowing device on two ports
Maybe you want a manual switch box *like*:https://www.fruitycables.co.uk/products ... box-2-portThat should be (relatively) foolproof.Statistics: Posted by jaclaz — Thu Apr 25, 2024 3:29 pm
View ArticleAnnouncements • Re: v6.49.15 [stable] is released!
*) defconf - updated wireless password handling; Good !!!Statistics: Posted by andrewhi — Thu Apr 25, 2024 4:18 pm
View ArticleBeginner Basics • Re: Non-STP Bridge forrwards traffic to other ports
In theory that has nothing to do with bridge mode (none, STP, RSTP, MSTP). Bridge mode is about loop detection (and blocking ports where loops are detected).What you see is likely effect of improper...
View ArticleGeneral • Dissapointed with Chateau LTE6 and its modem reliability
Hello, we are a small ISP and we have installed the Chateau LTE6 for new customers, and we are dissapointed with its modem reliability (FG621-EA).Without external antennas has bad reception, but its...
View ArticleGeneral • Re: This very simple firewall ruleset SHOULD work-- but.....
SSH rule because of address-list instead of address.As for other traffic, I'm not sure. Rules are too complex and order is not optimal, but in theory should work.Statistics: Posted by karlisi — Fri...
View ArticleGeneral • Re: Dissapointed with Chateau LTE6 and its modem reliability
we are a small ISP and we have installed the Chateau LTE6 for new customersWell, then you should contact support@mikrotik.com additionally. It's OK to ask community here for experiences, but to really...
View ArticleGeneral • Re: REST API active users
Sent an email to Mikrotik support about this, they confirmed it is a real issue, and they are aware of it.Statistics: Posted by kormenator — Fri Apr 26, 2024 1:12 pm
View ArticleContainers • Re: Container mode on CHR 7.15rc2 Arm64
We have confirmed this issue, meanwhile you could simply run another virtual machine with your apps in that, without need for containers at all.Statistics: Posted by normis — Fri Apr 26, 2024 1:14 pm
View ArticleRouterBOARD hardware • Re: Map Lite hard reset buttom
What is 30-30-30? Please follow the documentation on reset: https://help.mikrotik.com/docs/display/UM/mAP+liteStatistics: Posted by normis — Fri Apr 26, 2024 2:09 pm
View ArticleGeneral • Re: simple 3 isp dhcp clients with aggregation
hi,have uploaded my latest config. btw, what i am doing is: testing a openvpn and wireguard server. i.e. the server is in vlan 2 and i am connecting to it from a client which is in vlan 1. thus i...
View ArticleForwarding Protocols • Re: IEEE1588 PTPv2 support for CRS317
Hi dgel27,I am still working on a reliable PTP config for the CRS326-24S+2Q+. I have a working config that runs well with some RU's, even in a 100Mhz 4x2 config but some other RUs don't work well and...
View ArticleRouterBOARD hardware • mikrotik mUPS?
what happened to that device? https://mikrotik.com/product/mupsi knew it existed, now was planning an outdoor instalation with outdoor UPS and this thing is nowhere to be found.Statistics: Posted by...
View ArticleRouterBOARD hardware • Re: mikrotik mUPS?
The discontinued MikroTik product is not the best for do that, and do not have any battery inside...You read the instruction?For example, the product do not convert 12V input (from battery) to 24V...
View ArticleGeneral • Re: MLAG problem?
I encountered problems with Cisco port channels connected to MikroTik CRS317 RouterOS 7.14.3 too.Code: Eth1/22 sw-1 vpcCmpFai trunk full auto 10Gbase-LRUsingCode: # sho vpc consistency-parameters vpc...
View ArticleWireless Networking • Re: Connecct cAp to hap ax2
There are 2 versions of capsman: legacy and wifiwave2.cAP as in RBcAP2nD uses legacy wifi.hAP AX2 uses wave2 wifi.Depending on which device acts as your controller, it might be possible to have both...
View ArticleWireless Networking • Re: Cube 60 Pro ac
Wanted to ask why 5Ghz is connection so slow?HiBecause the 5 GHz link is not used now5GHz link is not used (reserve)Code: # 2024-04-26 15:21:41 by RouterOS 7.14.3status: connected-to-esschannel:...
View ArticleClik here to view.
Beginner Basics • IPv6 firewall filter not filtering
I receive messages in my log like the following:DROP IPv6 forward: in:<wan-interface> out:<guest-interface>, connection-state:invalid src-mac <fritz-box-ip-address>, proto TCP (RST),...
View ArticleSwOS • Re: ports dont link after device reboot
SwOS 2.16 was released and it still seems to have the same problem. Tested on a CRS309-1G-8S+. Only thing I didn't do was removing power to the device after the upgrade to see if that changes...
View ArticleGeneral • Re: Help with inter VLAN routing (seems to work except web interface?)
Are you sure you want this to happen?It's an OpenSpeedtest server that I'd like to also be accessible from the outside. Would adding "in-interface=pianetafibra_pppoe" restrict the rule enough? I'm...
View ArticleClik here to view.
Beginner Basics • Re: iPhone L2TP Issues
Despite this being an issue for months across 2 different sites, performing the troubleshooting in my original post and replicating the issue on a router with a basic config, this issue suddenly...
View ArticleBeginner Basics • Re: hap AX3 - HW offloaded Bridge - traffic leak
Currently, HW offloaded bridge support for the IPQ-PPE switch chip is still a work in progress. We recommend using, the default, non-HW offloaded bridge (enabled RSTP)....
View ArticleGeneral • Re: Any solution for admit-only-VLAN-tagged misconfiguration
That's why always have one port off the bridge so you can access device in case of misconfiguration. Do you see your device MAC address in neighbors in winbox ?Yes I saw the MAC address in winbox, but...
View ArticleRouterOS beta • Re: RB5009 Slow Speed 2.5G Bug Report (as requested)
Gahhhh! I have this same problem... So one thing I've noticed is that on a device connected at 1Gbps everything is fine bidirectionally... UNTIL there's some delay added... Add some delay on a linux...
View ArticleWireless Networking • hap ax3 802.11b possible in /wifi/capsman?
Hello,I'm setting up a new hap ax3 in my existing network (RB952Ui-5ac2nD). I would like to setup wifi2.4, wifi5 and wifi6 with the hap ax3. Importance fact: I have devices that requires...
View ArticleScripting • Re: script
Install an OS designed to be scripted from the ground up, then use that to netinstall your routers. One of many possible expressions of this basic philosophy is this article.This is meant as...
View ArticleGeneral • Get Two public IP on the same interface
Hello for all..from your experience can you share how can you get two public IP address on the same interface..?I mean the following :I have ONU device connected to Mirkotik in ether1 interface.in...
View ArticleGeneral • Dual WAN - what setup is recommended?
Hello, i need better understand how to set dual WAN the correct wayCurrently i have most basic setup - pppoe in port 1 made by quick set, router mode + i added 4 wireguards (and firewall rules). ISP1...
View ArticleForwarding Protocols • MPLS TE Paths buggy ros7?
It seems MPLS TE paths have issues in ros7 still?I can create a path from cli, and it works fine, however the path does not display in winbox.Conversely, if I create a path in winbox, it does not...
View ArticleWireless Networking • Re: hap ax3 802.11b possible in /wifi/capsman?
From what I understood: leave it to AX and it should automatically remain backwards compatible down to 802.11b.Statistics: Posted by holvoetn — Fri Apr 26, 2024 5:54 pm
View ArticleGeneral • Re: Dual WAN - what setup is recommended?
sorry not familiar with ipv6 so cannot assist.Statistics: Posted by anav — Fri Apr 26, 2024 5:56 pm
View ArticleGeneral • Re: Get Two public IP on the same interface
config??Statistics: Posted by anav — Fri Apr 26, 2024 5:57 pm
View ArticleGeneral • Re: Winbox connection denied through VPN
The input chain should not be open to the internet except for handshaking for a VPN.ONe does not directly acccess winbox aka the router (input chain) for config purposes, instead you make the tunnel...
View ArticleWireless Networking • Re: How to configure WPA3 only not WPA2/WPA3...
I don't know whether to say the "mea culpa" but perhaps it's just a question of interference from one of the two sites and above all of signal limits.First of all I have to apologize to all of you and...
View ArticleAnnouncements • Re: v7.14.3 [stable] is released!
accientally double post, pls del.Statistics: Posted by kinjakinja — Fri Apr 26, 2024 6:20 pm
View ArticleScripting • "my script does not work" in v7.10
please help me to make it work i cant make a script so can you modifi this for me to make it work in v7.10 i cant get [/system clock get date]Code: :local dateint do={ :local montharray { "jan",...
View ArticleBeginner Basics • Re: Dynamic port forwarding
There are many reasons for server to go down ... one is that it emits smoke.I actually had that happen once - although it was running as a server (and a server OS) it was actually a dell tower....
View ArticleForwarding Protocols • V6-MPLS Backbone with Cisco BGP Timer and Multicast...
Dear all,We have a mpls backbone in production with OSPF, LDP, MP-BGP, L2VPN/L3VPN and route-reflector on Cisco IOSXE stuff.We want to add some new POPs with Mikrotik routers and we build a lab like...
View ArticleGeneral • Re: ⚠️WARNING: RouterOS v7.10+ will break all scripts based on...
please please please help me to make this script work againCode: :local dateint do={ :local montharray { "jan", "feb", "mar", "apr", "may", "jun", "jul", "aug", "sep", "oct", "nov", "dec" }; :local...
View ArticleGeneral • wireguard vpn client on mikrotik
Could someone share config file of wireguard vpn client installation on mikrotik router? I want to do is to connect LAN client to the VPN server through the router. My wireguard server is installed on...
View ArticleGeneral • When does CAPsMAN actually provision?
I noticed recently that I cannot get slave interfaces to show up by editing the provisioning configuration. Instead, I have to go to each CAP and disable/enable the cap interface to trigger a...
View ArticleScripting • Re: "my script does not work" in v7.10
viewtopic.php?t=196072stop spam on forumthe script is really shitty, this is what you want, but still shitty.Code: :local dateint do={ :local days [ :pick $d 8 10 ]; :local month [ :pick $d 5 7 ];...
View ArticleBeginner Basics • VPN setup question
Hello everyone,My network is as follow:ROUTER -> MIKROTIK -> NASBasically, I have a NAS physically connected to the Mikrotik, on which a VPN is configured via OVPN.I can successfully connect to...
View ArticleRouterBOARD hardware • RB5009 2.5G performance issues
Hello,I was thinking of purchasing RB5009UG+S+IN to upgrade my home network to 2.5G capability, but I have read some worrying things that there is some issue that could prevent me from utilizing full...
View ArticleGeneral • Re: RouterOS 7 can't edit dynamic object
Thanks for the advise, @Amm0I thought about that already. Will try to figure out something with placing the unneeded(and harmful for my config) hotspot rules below my own manually created. Except that...
View ArticleBeginner Basics • Re: I need so advice on VLANs for devices connecting only...
If just starting out I do personally would stay away from capsman, it adds a layer of additional complexity that should only be tackled when more comfortable with RoS.Yes you can only use one VLAN for...
View ArticleGeneral • Re: wireguard vpn client on mikrotik
create wireguard interface, any port can be chosen. if you are given a private key put in the private key here before generating the interface or hitting applyAdd wireguard interface to WAN interface...
View Article
